6D125 Used Fuel Injection Pump 6151 - 73 - 1240 For Excavator PC400
- 5 D6 - 11
Specification
| Part name | Engine fuel pump |
| Part code | 6151 - 73 - 1240 |
| Pump number | 191000 - 96208 |
| Condition | Original Used |
| Cylinder | Six |
| Test staus | Normal |
| Engine Type | Diesel |
| Injection | Direct injection |
Description
Is the fuel pump part of the engine?
The engine driven fuel pump is part of the Excavator fuel system,
one of the most important elements of the fuel system, like to any
other internal combustion engine equipped vehicle.
What is the pressure of a fuel pump?
The capability of the high pressure gear stage of the pump in
pressure is 850 to 900 psi (pounds per square inches), and in
volume displacement 50 to 60 U. S. Gallons, or 13.000 litters per
hour at maximum nominal operating speed of the pump at 6250 rpm for
this pump, and when the engine operates to take off power.
How a mechanical pump works?
A mechanical fuel pump is driven by the camshaft , or by a special
shaft driven by the crankshaft . As the shaft turns, a cam passes
under a pivoted lever and forces it up at one end.
The other end of the lever, which is linked loosely to a rubber
diaphragm forming the floor of a chamber in the pump, goes down and
pulls the diaphragm with it.
When the lever pulls the diaphragm down, it creates suction that
draws fuel along the fuel pipe into the pump through a one-way
valve .
As the revolving cam turns further, so that it no longer presses on
the lever, the lever is moved back by a return spring , relaxing
its pull on the diaphragm.
The loosely linked lever does not push the diaphragm up, but there
is a return spring that pushes against it.
The diaphragm can move up only by expelling petrol from the
chamber. The petrol cannot go back through the first one-way valve,
so it goes out through another one leading to the carburettor.
The carburettor admits petrol only as it needs it, through the
needle valve in its float chamber.
