S6K Used Engine Assembly For Excavator E320C E320D Water Cooling
Specification
| Car name: Complete Engine |
| Model Number: S6K |
| Cylinder stroke: 130 |
| Application: Excavator |
| Cylinder diameter: 102 |
| valve: 16 valve |
| Cooling: Water cooling |
| Output: 99.9kw |
| Injection: Electric |
| Cylinders of number: 6 |
Description
Engine parts
Spark plug
It is used in spark ignition engine. The main function of a spark
plug is to conduct a high potential from the ignition system into
the combustion chamber to ignite the compressed air fuel mixture.
It is fitted on cylinder head.
The spark plug consists of a metal shell having two electrodes
which are insulated from each other with an air gap. When high
potential current supply to spark plug it jumping from the supply
electrode and produces the necessary spark.
Main Parts of an Internal Combustion Engine (spark plug)
Injector
Injector is usually used in compression ignition engine. It sprays
the fuel into combustion chamber at the end of compression stroke.
It is fitted on cylinder head.
Main Parts of an Internal Combustion Engine (injector)
Manifold
The main function of manifold is to supply the air fuel mixture and
collects the exhaust gases equally from all cylinder. In an
internal combustion engine two manifold are used, one for intake
and other for exhaust. They are usually made by aluminum alloy.
Main Parts of an Internal Combustion Engine (manifold)
Camshaft
Camshaft is used in IC engine to control the opening and closing of
valves at proper timing. For proper engine output inlet valve
should open at the end of exhaust stroke and closed at the end of
intake stroke. So to regulate its timing, a cam is use which is
oval in shape and it exerts a pressure on the valve to open and
release to close. It is drive by the timing belt which drives by
crankshaft. It is placed at the top or at the bottom of cylinder.
Main Parts of an Internal Combustion Engine (camshaft)
Gudgeon pin or piston pin
These are hardened steel parallel spindles fitted through the
piston bosses and the small end bushes or eyes to allow the
connecting rods to swivel. It connects the piston to connecting
rod. It is made hollow for lightness.
